FAQ’s
Q&A about Orca Slicer based on User Experiences
Orca Slicer is a free, open-source 3D printing slicer developed by SoftFever. Based on Bambu Studio and PrusaSlicer, it offers an intuitive interface and advanced features to enhance your 3D printing experience.
You can download Orca Slicer from the orcaslicer.us or GitHub release page. Installers are available for Windows, macOS, and Linux. Ensure you download from official sources to avoid potential security risks.
Your initial move is to choose your printer model.
After it configures filament settings.
Then set up slicing parameters.
You can also use its setup wizard for a hassle-free setup process.
The primary benefit of Orca Slicer is that it provides advanced calibration options and opens up the delightful Bambu Studio user experience to non-Bambu Lab users. Other features, like sandwich mode, are specifically designed to improve print quality.
Orca Slicer allows direct network access to printers running OctoPrint or Klipper. During setup, you can install the Bambu Network plugin to facilitate this connection.
Orca Slicer includes built-in calibration tools such as temperature towers, flow rate tests, pressure advance calibration, and retraction tests to help fine-tune your printer’s performance.
While both slicers share a common foundation, Orca Slicer offers additional features and a user-friendly interface tailored to both beginners and advanced users. It also provides broader printer compatibility and enhanced calibration tools.
Common issues include connection problems, software not opening, partial slicing, and crashes with complex models. Troubleshooting steps involve checking network configurations, updating graphics drivers, and simplifying models.
You can join the Orca Slicer community through the official GitHub project page and Discord channel. These platforms offer support, updates, and user discussions.
Orca Slicer collects minimal personal information, primarily to improve performance and provide support. Details are outlined in the Privacy Policy.
If your printer does not exist in the pre-configured profiles, then you can create a custom printer profile Here are the steps:
First of all, open up the Ocraslicer and click on “New Project”
From the dropdown menu click on the Printer menu and then choose “Create 3D Printer”.
Now fill up the specifications like nozzle size, dimensions, etc.
Click on Ok.
Lastly, configure the Filament Presets and then click on “Create”.
Now navigate the Printers section and you will notice your custom 3D printer here.
Currently, Orca Slicer is available for Windows, macOS, and Linux platforms. There is no Android, iOS, or mobile versions at this time.
Location
1759 Farland Avenue, San Antonio, Texas, United States
Email: support@orcaslicer.us
Copyright © 2025 Orcaslicer.us, All rights reserved.